Design, balance, and validate Master Antenna Television (MATV) coaxial distribution networks directly in your browser. Model headend modulators, distribution amplifiers, directional taps, splitters, and RG6/RG11 cable runs with real-time dBµV / dBmV Signal Level Meter readouts.
Probe any node, tap port, wall outlet, or amplifier output to inspect per-channel dBµV levels, carrier tilt, and headroom.
Accurate frequency-dependent loss modeling across RG59, RG6, and RG11 coax runs by exact cable length in feet or meters.
Combine 2/4/8-way splitters, directional taps (6 dB to 30 dB), launch amplifiers, and slope equalizers in complex multi-floor trees.
Configure VHF/UHF/QAM channel plans and analyze high-to-low frequency slope across long trunk and riser runs.
Runs smoothly in Chrome, Edge, Firefox, or Safari with local project save/load and Jayyraven SSO cloud tier support.
Export your network JSON directly into MATV Schematics to produce clean architectural wiring diagrams for client proposals.
Start simulating immediately as a guest, or unlock full multi-floor export and advanced RF tools with Jayyraven Pro.
MATV RF Simulator (MATV RF Architect) is a browser-based RF distribution engineering tool for designing Master Antenna Television (MATV) systems. It models headend outputs, amplifiers, splitters, directional taps, and RG6/RG11/RG59 coaxial cable runs with real-time dBµV and dBmV signal level calculations.
No installation is required. The simulator runs directly in any modern web browser at matv-sim.jayyraven.dev with instant drag-and-drop node wiring and live Signal Level Meter (SLM) probes.
Yes. You can configure channel maps across VHF, UHF, and QAM/ATSC frequencies and simulate frequency-dependent attenuation (slope/tilt) across RG59, RG6, and RG11 coaxial cables.
You can export your simulated MATV project JSON directly into MATV Schematics (matv-layout.jayyraven.dev) to auto-generate clean, industry-standard riser diagrams and schematic documentation.